THE ULTIMATE GUIDE TO PRIMER & SUPER BONDER

One of the most essential product in your pre-treatment range.

Effect:

Cleanses natural lashes

Removing oils, proteins and traces of make-up ensuring excellent retention.

Deeply nourish the natural lashes.

HOW TO USE:

💡 Either apply a drop of the Sensitive Lash Primer directly to the micro brush OR add a drop of Sensitive Lash Primer onto a glue stone and dip microfibre brush into it. Wipe off any excess product as necessary.

💡 With the help of a second microfibre brush, gently hold the natural lashes between the two brushes and gently wipe the natural lashes from root to tip.

💡 For best results, prime the lashes after using the lash shampoo to balance the moisture and help your lash glue to work faster.

2. SUPER GLUE LASH PRIMER

Super Glue Lash Primer used for removing dust from the lashes extensions before application of lashes extensions.

Making glue stronger and strengthening the firmness of the lashes extensions.

HOW TO USE:

💡 Either apply a drop of the Super Glue Lash Primer directly to the micro brush OR add a drop of Super Glue Lash Primer onto a glue stone and dip microfibre brush into it. Wipe off any excess product as necessary.

💡 With the help of a second microfibre brush, gently hold the lashes extensions between the two brushes and gently wipe the lashes extensions from root to tip.

❌ Do not apply Super Glue Lash Primer on the natural lashes!!

3. SUPER BONDER

Adds elasticity to the adhesive. The additional flexibility ensures the bonds don't break as easily, therefore resulting in better retention.

Instantly polymerises the glue, without shock curing! It locks in the fumes from the adhesive and with the fumes contained, irritation and sensitivity are significantly reduced!

HOW TO USE:

💡 Once you've completed the eyelash treatment, squeeze 1 small drop of Super bonder onto a microfibre brush and carefully apply at the bottom 2-3mm of the eyelash set (adhesive area).

💡 Make sure to apply only a small drop of the product to avoid getting it into the client's eye.

💡 Allow the product to dry for 1-2 minutes.

💡 Remove the eyepatches and let the client open their eyes.